Wood is in Our Blood , Wood is Our World
Basic Router
Different Routing can be done on any irregular shape of wood.
Engraving can be done on workpiece by copying the design of master jig.
- Model No.
- J-901
| Model | J-901 |
|---|---|
| mm / inch | |
| Throat clearance | 380 / 15" |
| Spindle vertical movement | 25 / 1" |
| Base table size | 355×355 / 14"×14" |
| Up/Down movement of table | 125 / 5" |
| Routing work table size | 610×420 / 24"×16½" |
| Table tilt - degree | 15° |
| Spindle speed - RPM | 11000 |
| Power required - HP / RPM | 1.5 / 2800 |
| Approx. wt. of machine - kg | 175 |
Standard Accessories :-
Routing work table, R/F switch, 3 nos. different size guide pins, collet – 12 mm hole with 8 mm hole sleeve, motor pulley, motor fixing plate, flat belt, toolkit & m/c manual